New product available from In2Connect - ST12 IP67 threaded coupling connector

The Pintail connector range provides low-cost, weathertight standard interconnection for industrial and marine applications.

Pintail connectors can build an indoor/outdoor interconnect system that offers the performance and reliability of MIL threaded connectors at the cost of a commercial (COTS) product. 

The ST12 (rear panel mount hole size 12mm/front panel mount hole size 14mm) series of multi-pin, threaded coupling connectors will provide IP67 integrity when mated and will work reliably indoors and outdoors where occasional submersion is encountered at a limited depth. It will also remain undamaged by the formation of ice on the enclosure and will resist corrosion.

Click here to see the webpage that supports the product

New product available from In2connect - IDC d-sub connector

The new Conec IDC d-sub connector with stamped contacts provides a modular approach to electronic inter-connection. Outstanding features of the IDC connectors are high contact reliability, long life and low contact resistance.

These standard IDC D-sub connectors have stamped contacts. IDC technology is a solderless connection method which remains very popular in the mass production of electronic equipment.

 

Soldering can have several disadvantages ~ it can create thermal stress, and pretty obviously requires solder to be applied in what can be a costly reflow manufacturing process.

Insulation displacement contacts (IDCs) allow a ribbon cable to be forced onto sharp tines on the back of the contacts; this action pierces the insulation of all the wires simultaneously. This is a very quick means of assembly whether done by hand or automatically.The design these IDC dsub connectors offers a very reliable mass termination and cost effective approach to interconnecting PCBs, or wire-to-board applications.

Click here to see the webpage supporting this product

Nicomatic Micro-flex

A very innovative new solution for Mil Aero Applications. With more and more printed ink and flex pcb circuits being used in Mil/Aero applications, Nicomatic now offers Micro-flex. 

Thanks to their double know-how in both crimp connectors and CMM 2mm microconnector developments, Nicomatic has produced an innovative new connector/flex harness solution aimed at card-to-flex connections.

This new "two in one technology" ensures a high mechnical link and electrical continuity between 2mm pitch CMM micro-connectors and flat conductor Crimpflex technology.

One of the major advantages is a small 2mm pitch that allows the reduction of space, but there is also a lower weight feature that enables replacement of the discrete wires and bulky cables still very present in avionics equipment. Nicomatic is able to reduce up to 30% weight with a solution that is thinner and lighter than a traditional cable.

Click here to see the webpage supporting this Nicomatic Micro-flex connector

New product available from In2Connect - PC/104 Plus 22mm

PC/104 - Plus in 22mm

This new ept product, available from In2Connect, is the PC/104 and is standard for PC-compatible modules which are intermateable to set up a complete computing system. This new female ept connector permits 22mm board to board distance.

 Standard PC/104 connectors accomodate a board to board distance of 15.24mm. This was usually enough to connect two boards. However, with the ever increasing requirement to connect more components, for example heat sinks, fans and other cooling systems, manufacturers now often need a greater distance. As a specialist for connectors ept has reacted to this need and as a result is now the first provider to have a suitable connector in its lineup.

Click here to see the webpage supporting the PC/104 Plus 22mm

New products available from In2Connect - Conec Press-fit D-sub and D-sub right angled dual port

Press-fit D-sub connector

Another Conec product is available from In2Connect Uk Ltd. The Conec Press-fit contacts are used on PCB boards for equipment in industrial control systems, computer environment and in telecommunication equipment.

Standard or high density D-sub connectors can have press-fit contacts. Press-fit technology is a solderless connection method which is increasingly popular in mass board production.

Click here to see the product webpage for Press-fit D-sub connector

 D-Sub Right Angled Dual port

Similar to the Press-fit D-sub connector in the previous post, there is also the Conec D-sub right angled dual port connector now available.

Dual Port, stacked right angled D-Sub connectors are a popular space saving interface for many I/O applications. Offered in 9, 15, 25 and 37 positions they are a good choice for a cost effective industry standard connection and are ideal for PCB space saving applications, being fully compatible with mating industry standard single d-subs.

Click here to see the product webpage for D-sub right angled dual port

New product range available from In2Connect- Nicomatic DMM

The new DMM series is a robust, compact and shock resistant connector registered under trademark MICRO-D-MIX.

It is available in all LF or mixed-layout configuration, with high frequency and/or high power contacts with possible arrangements of between 1 and 4 rows of contacts with up to 120 contacts.

DMM connectors offer a high pin density (2mm pitch for signal contacts), as well as hybrid contacts (low frequency, high power), which contribute to equipment miniaturization. Compared to Micro-D connectors they offer a higher density, a lower profile and a much lighter solution.

Nicomatic fixings are the same whether you use a male or female connector, covers are mountable without modifying the front or real panel and the philosophy of the system is to be modular with simple universal concepts. The addition of a metal shield enables resistance to exterior factors such as electromagnetic interference (EMI), and grounding. The cover design is a good alternative to the back shell and leads to cost reduction.

Features
	High density package and small footprint
	Signal, power and coax contacts
	Removable crimp contact
	Front/rear panel mounting, straight/90° cable/pcb
	Cost effective solution
	According to MIL-DTL-83513G or MIL-DTL-55302F test routine
	EMI 360° Shielding and backshell options

Click here to download the Nicomatic DMM datasheet

Click here to visit the In2Connect product webpage

New product range available from In2Connect- Weipu WP20

We are happy to announce that we have added another product to our already wide range of products which we have to supply. 

The new product, WP20, are waterproof, IP55 rated bayonet connectors that are dust and dirt proof and intended for indoor use.

WP20 connectors build a powerful indoor interconnect system with up to 5 contacts rated at 30 Amp.

The WP20 series bayonet coupling connectors will provide IP55 integrity when mated and will work reliably in indoor conditions.

Materials and specification

Coupling- Bayonet

Shell- Nylon PA66/ zinc alloy

Insert material- PPS max temperature 260°C

Contact material- Brass

Contact plating- Gold over nickel

Termination- 7-12 contacts solder, 2-5 contacts solder/ screw

Mating cycle- >500

Temperature range- -25°C / +85°C

IP rating- IP55 (Clamping cable plug TE)

Features

Rated current up to 30A

IP55 rated

Solder or screw contacts up to 5 way, solder 7-12

Bayonet coupling for positive mating with key/keyway orientation

WP20 in 2 to 12 pole versions

Competitively priced

Male or female contacts in any shell type

RoHS Compliant and CE marked

Greater than 500 mating cycles

Click here to access the Weipu WP20 datasheet

More information is available on the In2Connect website (Click here to access the website)